Multi-Purpose Single Point Tester
for Pastes and Slurries
Pastes and Slurries Composition quality through fast and precise laboratory devices based on non-contact eddy current technology.
- Real time measurement
- Accurate single-point measurement of the permittivity for non-conductive materials (F/m)
- Manual mapping of permittivity guided by an easy-to-handle software
导言
The EddyCus® lab 2020 RMB is a unique industrial eddy current measurement device utilizing frequencies from 10 kHz up to 100 MHz dedicated to the characterization of high specimen. The variation of the measurement frequency allows the control of the penetration depth. The measurement with high frequencies benefits the characterization of near surface material characteristics of bulk materials and thin films. Additionally, the sensitivity increases with increasing measurement frequency. Therefore, also very low conductive materials and layers can be characterized. Furthermore, the device supports the generation of depth profiles by utilization of multi frequency measurements. Measurement parameters are conductivity and related characteristics.
该设备通常用于
- 不同穿透深度的散装物料电导率测试
- 物料分拣
- 非导电材料上导电层的金属层厚度测试
- 导电材料上涂层厚度测定（剥离法）
- 高导电性与低导电性材料近表面薄层中硬度或微观结构等材料特性的表征
测量领域
样品尺寸范围为10毫米×10毫米至200毫米×200毫米。
带定位标记便于定位。
该设备四面开放，因此不受尺寸限制。
功能和优点
无限样本量
高样本可测量
各种分析选项
即时效果
手动映射
易于使用
3D 查看器
If you see a blank device please press F5 to reload the page.
一台设备，多种测量参数
The EddyCus® lab 2020 RMB is capable of measuring multiple parameters.
- Permittivity (F/m)
- Resistivity (mOhmcm)
- 电导率
- 金属层厚度
- Metal substrate thickness
- 发射率
- Defects and integrity assessment
软件和设备控制
- 非常方便用户使用的软件
- 直观的触摸屏导航
- 实时测量片电阻和层厚度
- 软件辅助手动绘图选项
- 多种数据保存和导出选项
EddyCus®实验室2020年人民币视频
The video gives you an general impression of how to use the lab 2020 RMB. Which materials can be analysed and how the device works in general.
EddyCus® lab 2020 数据表（人民币）
设备功能
| 测量技术 | 高频涡流传感器 |
| 材料 | Plastics, composites, ceramics, resins, liquids etc. |
| 基底面积 | 8英寸 / 204毫米 × 204毫米 |
| 最大样品尺寸 | 无限制（设备四面敞开） |
| Relative permittivity range accuracy can be optimized within a customer specified range |
1 – 10 @ 2% accuracy 10 – 80 @ 2 % accuracy |
| 测量范围/精度 | 取决于测量任务、材料成分和测试对象体积。请咨询 SURAGUS 团队 |
| 设备尺寸（W/H/D） | 11.4英寸×5.5英寸×17.5英寸 / 290毫米×92毫米×445毫米 |
| 重量 | 10千克 |
测量能力
| Relative permittivity range | |
|---|---|
|
Relative permittivity range accuracy can be optimized within a customer specified range |
1 – 10 @ 2% accuracy 10 – 80 @ 2 % accuracy |