Measurement-as-a-Service
For companies that do not operate continuous quality control and only measure a few times a year.
- Non-contact measurement
- No space for a measurement device required
- No budget required for a self-owned measurement device
- No training period for a measurement expert required
Introduction
You benefit from the experience of our employees who measure and analyze samples with our instruments on a daily basis. This means that you do not need a training period or an extra trained expert.
We have a range of high precision devices, meaning we can select the most suitable device for your measurement task to get the best and most meaningful results.
Process
- You fill out PDF formular below (choose your language)
- You send us the objects of interest
- We measure them
- We create a test report
- We send the samples and the test report to you
Structure of a measurement study
Most studies start with a question from your side. Is my process signature visible in the data? Can this parameter be measured at all, or this defect detected reliably? We design the study around that question and carry out the measurements in our lab.
Our reports follow standard scientific criteria. We begin with an overview of the measured samples, then describe the measurement setup and instrument settings, so that every value can be traced back to how it was obtained. We report the measurement values that answer your question, and on request we add a short assessment for each individual sample together with the mapped results. The summary brings the findings together and comments on them, written to be understood on its own, without us in the room.
We present the completed study to you in an online meeting, walk through the results and answer your questions. Afterwards the full report is yours to keep and share internally.